Sumitomo TYPE-201e-VS Specifications
Applicable optical fiber | Material | Silica Glass |
---|---|---|
Profile type | Single Mode Fiber (ITU-T G.652) Multi Mode Fiber (ITU-T G.651) Dispersion Shifted Fiber (ITU-T G.653) Non-Zero Dispersion Shifted Fiber (ITU-T G.655) Bend Insensitive Fiber (ITU-T G.657) |
|
Number of fiber | 1c | |
Cladding diameter | φ125 μm | |
Coating diameter *1 | Single: 250 μm, 500 μm, 900 μm | |
Cleave length | 5-10mm | |
Electrode Life *2 | 3,000 | |
Applicable Cable*3 | 0.25 mm primary coated 1-fiber drop cable | 2.0 to 3.1mm×2.0mm (excluding messenger steel wire) |
Physical Characteristics | Size (Main body)*4 | 110W×140D×76H(mm) (4.3W×5.5D×3.0H(inches)) |
Weight | 860g (Including BU-12L) | |
Display size | 3.5-inch touch screen color LCD display | |
Power Conditions | AC operation | With AC adaptor ADC-1340, ADC-1340A Input: AC 100-240V 50/60Hz 1.45A |
DC operation | Input: DC 10-15V, 4.5A | |
Battery operation | BU-12S: 11.1V (Typical 1530mAh) BU-12L: 11.1V (Typical 3060mAh) Typical Charging Time (For BU-12S, 12L) : Approx. 3 Hours (Standby mode) Approx. 20 Hours (During operation) |
|
In – Out Terminal | Serial port | USB 2.0 mini-B type |
Storage media | microSD / microSDHC memory card | |
Splice Performance | Splice loss (typical)*5 | SMF : 0.05 dB MMF: 0.03 dB DSF : 0.08 dB NZDSF : 0.08 dB |
Screening load (typical) | 1.96-2.09N (at stage) | |
Splice time (typical) | Approx. 11 seconds (SMF1c) | |
Splice & Heat cycles*6 | Approx. 100 cycles (with BU-12L) | |
Splice program | Max. 200 programs | |
Splice data storage | 10,000 splices | |
Splice image capture | 64 images | |
Sleeve length | Up to 60mm | |
Applicable protection sleeve | The protection sleeve for single fiber, up to 60mm length, up to φ5mm diameter. e.g. FPS-1 (length 60mm) FPS-61-2.6 (length 60mm) Protection sleeve for Splice-On Connector Lynx2 CustomFit® Splice-On Connector |
|
Typical heating time*7 | Approx. 30 seconds (FPS-61-2.6 sleeve) | |
Heating Program | Max. 100 programs | |
Environmental Conditions | Operating temperature | -10 to +50°C |
Storage temperature | -40 to +80°C | |
Humidity | 0 to 95%RH (non-condensing) | |
Altitude | Up to 3,660 m | |
Environmental Durability | Shock resistance*8 | Drop from 76cm on bottom face |
Water resistance*8 | Equivalent to IPx2 (Operates normally after being exposed to water dripping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree. | |
Dust resistance*8 | Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 μm or below) |
*1 Fiber holders appropriate for the fiber coating is required.
*2 Electrode life may vary depending on the operating environment.
*3 Fiber holder cannot be used with loose tube cable.
*4 The projection parts are excluded.
*5 With Sumitomo identical fibers (in room temprature)
*6 Splice and Heat cycles may vary depending on the battery status and the operating environment.
*7 With Sumitomo protection sleeve in room temprature, powered with AC adapter.
*8 Confirms the battery operation in tests carried out by Sumitomo. Does not guarantee that the product is free of faults or damage.
Contact Us Today
We’re available to answer questions.